On the Flank contact chains in the chain, because of its attributes, it is a transmission device, which is primarily used to transmit power. So, what are its specific uses? What varieties can it come in? Cleaning precautions? These questions, the following will give their specific answers.

1. Use of Flank contact chains

If the Flank contact chains are used in the transmission, then the friction can be significantly reduced. Therefore, compared with the belt drive, it has certain advantages. However, in terms of speed, it is slightly worse, because its transmission speed should not be too fast, the flexibility is not as good as the belt.

So, to sum up, the Flank contact chains, as a transmission device, is mainly used in some high cleanliness, or relatively high requirements of the occasion. In addition, for high temperature or low temperature occasions, the use of Flank contact chains is also very suitable, not easy to cause problems.

2. Varieties of Flank contact chains

Flank contact chains, if it is divided according to raw materials, it is mainly the following, specifically:

(1) If the raw material is 1Cr18Ni9Ti or SS304 stainless steel, then the chain has good acid and alkali resistance and high and low temperature resistance, and has a long service life. Therefore, this Flank contact chains is mainly used in mechanical equipment.

(2) If the raw material is austenitic stainless steel, such as 304, 316 or 316L, the primary advantage is in corrosion resistance, as well as diamagnetism and good temperature adaptability.

(3) If the raw material is martensitic stainless steel, such as 2Cr13, then this kind not only has good anti-corrosion function, but also can reach the carbon steel grade in strength.

As a normal transmission device, you can't be careless when cleaning and using the Flank contact chains, otherwise it will affect its application. The planning of hyperbolic arc is generally adopted, the intention is to reduce the friction force, which is used in the place where the power is relatively large and the running speed is relatively slow.

Don't forget to clean the Flank contact chains, especially in rainy and humid environments. Require the use of dry cloth to wipe the chain and related accessories; If necessary, you can use an old toothbrush to clean the gap between the chain pieces, and remove the sediment and dirt accumulated between the chains.

When cleaning the Flank contact chains, use warm soapy water, but remember not to use strong acid or alkaline detergent, because these chemicals can cause damage or even break the chain. In addition, do not use the solution to increase the solvent to clean the Flank contact chains, how much will cause damage to the chain.

In addition, organic solvents such as scouring oil should be avoided during the cleaning process, which will not only destroy the environment, but also wash the lubricating oil in the bearing part.

Flank contact chains https://www.qj-chain.com/Flank-contact-chains.html